klover AURA 120, Установка, использование, техническое обслуживание и полезные советы

Страница: 55 / 68

50
AURA 80, CLASS 90, AURA 120, REA 100 PELLET-BURNING STOVE EN - Rev. 1.6
Pr05 M10 – 05 – 05 Screw feed gear motor ON time in stabilisation phase SC.F. STABILISE Seconds 0.1 – 8.0 1,2
Pr06 M10 – 05 – 06 Screw feed gear motor ON time in power 1 work phase SC.F. POWER 1 Seconds 0.1 – 8.0 1,8
Pr07 M10 – 05 – 07 Screw feed gear motor ON time in power 2 work phase SC.F. POWER 2 Seconds 0.1 – 8.0 2,4
Pr08 M10 – 05 – 08 Screw feed gear motor ON time in power 3 work phase SC.F. POWER 3 Seconds 0.1 – 8.0 3,0
Pr09 M10 – 05 – 09 Screw feed gear motor ON time in power 4 work phase SC.F. POWER 4 Seconds 0.1 – 8.0 3,8
Pr10 M10 – 05 – 10 Screw feed gear motor ON time in power 5 work phase SC.F. POWER 5 Seconds 0.1 – 8.0 4,5
Pr11 M10 – 05 – 11 Time after which an alarm is triggered in the event of a fault DEL. ALARMS Seconds 0 – 120 90
Pr12 M10 – 05 – 12 Brazier cleaning duration CLEANING DURATION Seconds 0 – 120 60
Pr13 M10 – 05 – 13 Combustion chamber minimum temperature in order to consider the
appliance on
MINIMUM THRESHOLD °C 70 – 280 180
Pr14 M10 – 05 – 14 Combustion chamber maximum temperature
MAXIMUM
THRESHOLD
°C 200 – 880 800
Pr15 M10 – 05 – 15 Combustion chamber temperature threshold for starting the air
exchangers
AIR THRESH. °C 100 – 720 180
Pr16 M10 – 05 – 16 Flue gas extraction speed in ignition phase SPE. IGNIT. FLUE GAS RPM 500 – 2800 1900
Pr17 M10 – 05 – 17 Flue gas extraction speed in start phase SPE. STAB. FLUE GAS RPM 500 – 2800 2000
Pr18 M10 – 05 – 18 Flue gas extraction speed in power 1 work phase SPE. FLUE GAS P.1 RPM 500 – 2800 1500
Pr19 M10 – 05 – 19 Flue gas extraction speed in power 2 work phase SPE. FLUE GAS P.2 RPM 500 – 2800 1650
Pr20 M10 – 05 – 20 Flue gas extraction speed in power 3 work phase SPE. FLUE GAS P.3 RPM 500 – 2800 1800
Pr21 M10 – 05 – 21 Flue gas extraction speed in power 4 work phase SPE. FLUE GAS P.4 RPM 500 – 2800 1900
Pr22 M10 – 05 – 22 Flue gas extraction speed in power 5 work phase SPE. FLUE GAS P.5 RPM 500 – 2800 2100
Pr23 M10 – 05 – 23 Heat exchanger 1 speed (primary) in power 1 work phase SPE. AIR P.1 Volt 65 – 225 190
Pr24 M10 – 05 – 24 Heat exchanger 1 speed (primary) in power 2 work phase SPE. AIR P.2 Volt 65 – 225 190
Pr25 M10 – 05 – 25 Heat exchanger 1 speed (primary) in power 3 work phase SPE. AIR P.3 Volt 65 – 225 200
Pr26 M10 – 05 – 26 Heat exchanger 1 speed (primary) in power 4 work phase SPE. AIR P.4 Volt 65 – 225 210
Pr27 M10 – 05 – 27 Heat exchanger 1 speed (primary) in power 5 work phase SPE. AIR P.5 Volt 65 – 225 225
Pr28 M10 – 05 – 28
Combustion chamber temperature threshold for considering the appliance
off
THRESHOLD OFF °C 50 – 250 170
Pr29 M10 – 05 – 29 Flue gas extraction speed in brazier cleaning phase
SPE. FLUE GAS
CLEAN.
RPM 700 – 2800 2800
Pr30 M10 – 05 – 30 Screw feed gear motor ON time in cleaning phase SC.F. CLEAN Seconds 0.0 – 8.0 1,0
Pr31 M10 – 05 – 31 Enable a primary room temperature sensor connected to the card CARD SENSOR On – Off On – Off Off
Pr32 M10 – 05 – 32 Preheating time PREHEAT. TIME Seconds 0 – 250 0
Pr33 M10 – 05 – 33 PELLET CRUISE CONTROL modulation threshold CRUISE THRESH. °C 120 – 880 560
Pr34 M10 – 05 – 34 PELLET CRUISE CONTROL modulation threshold Temperature Delta CRUISE DELTA °C 20 – 60 40
Pr35 M10 – 05 – 35 PELLET CRUISE CONTROL modulation time CRUISE TIME Minutes 1 – 10 3
Pr36 M10 – 05 – 36 Time after which C.A.T. maintenance operation is requested. SERVICE HOURS Hours
Off
260 – 2800
2000
Parameters “RELAX CALIBRATIONS” – Mod. AC80 / CLC90 (L09_161018)
Parameter Menu level Description Display Measurement Value field
Database
o2
Pr150 M10 – 10 – 01
Heat exchanger 1 speed (primary) in work phase with “RELAX
FUNCTION” active
SPE. AIR RELAX Volt
Off
65 – 225
Off
Pr151 M10 – 10 – 02 “RELAX FUNCTION” activation time TEMPS RELAX Minutes
30 – 254
On
30