klover AURA 120, Установка, использование, техническое обслуживание и полезные советы

Страница: 42 / 68

37
AURA 80, CLASS 90, AURA 120, REA 100 PELLET-BURNING STOVE EN - Rev. 1.6
Switch-off cycle
Pressing key 3 (On/Off) on the remote control or key 1 (On/Off) on the support panel, will switch off the appliance. The
display will show “SWITCHING OFF” . The pellet loading stops and the flue gas extractor speed increases to maximum
and then switches off after the cooling of the appliance, displaying "OFF” . During this stage the brazier is emptied and
cleaned.
Modifying the main room temperature Setting
- To modify the room temperature, simply select “SET ROOM” by pressing button 1 (Increase).
- Press keys 1 and 2 (Increase and Decrease) to adjust the value and confirm by pressing key 4 (Set) or 5 (Esc); values
between 07°C and 40°C can be set.
- Pressing key 3 (On/Off) or waiting a few seconds without confirming will mean that the set value is not saved.
During this operation, the display will appear as in the following picture:
During the working mode, the appliance enters economy mode operation - “MODULATION” when that temperature value
is reached (See “Working mode”).
Modifying the power Setting
- To modify the working power you must select “SET POWER” by pressing key 2 (Decrease).
- Press keys 1 and 2 (Increase and Decrease) to adjust the value and confirm by pressing key 4 (Set) or 5 (Esc); power
values between 1 and 5 can be set.
- Pressing key 3 (On/Off) or waiting a few seconds without confirming will mean that the set value is not saved.
During this operation, the display will appear as in the following picture:
SET ROOM
(Room temperature for the
main room, can be set at
values between 07°C and
40°C)