500mm x 250mm slates laid below 225mm batten gauge
For all sales enquires/orders, call or fax our Dedicated Customer Service Hotline and you
will automatically be connected to the internal sales representative dealing with your area.
Tel: 0800 7833216
Fax: +44 (0)1332 814 033
www.klober.co.uk
Klober Ltd, Unit 6F, East Midlands Distribution Centre, Short Lane, Castle Donington, Derbyshire, DE74 2HA
Tel:
+44 (0)1332 813 050
Fax:
+44 (0)1332 814 033
Email:
1
Follow the 600mm x 300mm fixing
instructions steps 1-2 (as shown overleaf).
Continue to follow the 600mm x 300mm
fixing instructions - steps 3-7 (shown overleaf).
Use the trimmed slates to mark a 270mm
long gap in the middle batten. Cut out this
section of batten.
When fixing the adjacent 500mm x 250mm
slates, they should abut the main vent body
(see guide marks on vent).
Fix an additional 1.2m support batten above
the cut batten (spanning two rafters) and nail
to the adjacent rafters.
At gauges below 225mm, slight trimming of
the slates in the course above the vent, may
be required.
2
3
4
5
6
Februar 2013
UNI-LINE SLATE VENT
FIXING INSTRUCTIONS
