Klipspringer IRTLC750I, Инструкция по эксплуатации

Страница: 6 / 9

6
4.0 TEMPERATURE MEASUREMENT
4.1
UNIT: °C or °F
LASP: Laser pointer on/off
EMIS: Emissivity. 0.95 default, settable from 0.10 to 1.00
AHLD: Auto hold function on/off
LCDR: Display rotation on/off
BCKL: display backlight on/off
The display of the next menu item will follow, after three seconds or
after pushing button 1. After the last menu item, the device will be in
infrared measurement mode.
4.2
If error message displays, refer to Section 7.0
5.0 Malfunction Indicators
5.1 ‘HI’ display: temperature measured is above range.
‘HI’ display: an open circuit is detected in probe or cable.
‘LO’ display: temperature measured in below range.
‘LO’ display: a short circuit is detected in probe or cable.
Three dashes display: probe disconnected or broken.
5.2 Contact our technical helpline if diagnosis is not clear.
6.0 BATTERIES
6.1
The lithium battery has an expected lifespan of up to five years allowing
for two hours continuous use each day. The battery symbols indicate
power status.
Battery
operational
Battery
operational
Battery
operational
Battery
operational
6.2
For best results, return instrument to address overleaf for replacement
and service check.