Klipspringer IRTLC750I, Инструкция по эксплуатации

Страница: 4 / 9

4
1.0 INTRODUCTION
1.1
Congratulations on your purchase of an ebro thermometer. With
considerate operation it should provide accurate and stable
measurements for a long time to come.
1.2 The TLC 750i is both an infrared as well as contact thermometer. You
can choose between these two measuring methods at any time. When
using the thermometer in infrared mode, there are two integrated la-ser
pointers to help target the desired measuring surface.
2.0 CAUTION
The thermometer must be protected from:
2.1 Electromagnetic fields created by electronic welding devices and
induction heating equipment.
2.2 Static electricity
2.3 “Thermal shock “caused by large and sudden temperature changes,
always allow device to stabilize for 30 minutes before use.
2.4 Risk of injury! When the probe needle is folded out, there is a risk of
injury. Risk of contamination! When injured by the probe needle, you
could be infected with dangerous bacteria! You may burn yourself! After
measuring objects at high temperatures, the feeler needle may stay hot
for some time. Avoid twisting the plunge feeler or turning the plunge
feeler in the wrong direction. Placing too much stress on the plunge
feeler can cause it to break. Operate the device only in compliance with
the parameters listed in the technical data. Never subject the device to
temperatures > 50°C! Warning concerning laser beams Risk of injury to
eyes! Do not point the laser directly at the eyes or indirectly at the eyes
by pointing at reflective surfaces.
2.5 Do not keep device near hot or very cold objects.