Klipsch Aragon Stage One, Руководство пользователя

Страница: 16 / 32

STAGE ONE
THX SURROUND PREAMPLIFIER
16
INPUT CONNECTIONS
The Stage One allows for analog, digital, and video outputs for seven sources
to be connected to the rear panel inputs. You also have the ability to switch
the Audio and Video signals independently of each other. For easiest opera-
tion, the digital, analog, and video outputs from each source should be
attached to the same source input (lined up vertically) on the rear panel of the
Stage One. If different types of video outputs are available, one of each type
(S-video, Composite, and Component/RGB/HDTV) can be connected to a sin-
gle source input. This ensures that video output will be available regardless of
the input selected on the monitor.
AC INPUT
Using the supplied IEC power cord, plug the Stage One into the wall outlet.
DIGITAL INPUTS
The rear panel of the Stage One provides ten digital inputs (three Toslink, and
seven Coaxial). Any S/PDIF digital output can be connected to any, or all ten
digital inputs. For inputs with both a Toslink and Coaxial digital connection,
Toslink takes precedence. It is possible to connect both a Toslink and a
Coaxial digital signal to a single source input, but only one will be operational
at a time. There is no need to "assign" the digital inputs, as one is provided
for each source connection. For easiest operation, the digital output of the
source should be connected to the same source input (lined up vertically) as
the analog and video outputs of the source.
ANALOG INPUTS
The rear panel of the Stage One provides seven stereo analog line level
inputs. The analog output of any line level source can be connected to any, or
all of the stereo analog inputs. The input gain of the analog inputs should be
adjusted for each analog source that you have connected. For optimum per-
formance, the gain should be adjusted to the highest point before clipping
occurs. (See “Advanced Features.”)
VIDEO INPUTS
The rear panel of the Stage One provides 17 Video inputs (seven composite,
seven S-video and three component). The Stage One does not perform any
video conversion. For example, if you connect the S-video output of a DVD
player to the Stage One, that signal will only be available at the S-video out-
puts.
MULTI-CHANNEL ANALOG INPUT
The Stage One provides an 8-Channel Analog Input. This DB-25 connector
can be used to connect the analog outputs from a DVD player with a built-in
decoder. The 8-Channel Analog input is passed directly to the analog pream-
plifier section. Individual channel level adjustment, as well as overall level
adjustment, is available for this input.
ANTENNA INPUT
Spring clips for an AM loop antenna, and a coaxial type terminal for a 75-ohm
FM antenna connection are provided on the rear panel to allow the built-in
AM/FM tuner to be connected to an antenna.
S VIDEO
OUTPUT
ANALOG
OUTPUT
DIGITAL
OUTPUT
COMPONENT
OUT SAT
DIGITAL
OUTPUT
ANALOG
OUTPUT
ANALOG
OUTPUT COMPOSITE
VIDEO OUTPUT
COMPONENT
VIDEO OUT
S VIDEO
INPUT
COMPONENT
INPUT
SATELLITE CD PLAYER
DVD PLAYER
VCR
TELEVISION
DIGITAL
OUTPUT
S VIDEO
OUTPUT
ANALOG
OUTPUT
COMPOSITE
VIDEO INPUT ANALOG
INPUT
S VIDEO
INPUT
S VIDEO
OUTPUT COMPOSITE
VIDEO OUTPUT
COMPOSITE
VISEO INPUT
AM ANTENNA
FM ANTENNA
Unbalanced DB-25 Pin Assignments
PIN
1
2
3
4
5
6
7
8
9, 10
11, 12, 13
14
15
16
17
18
19
20
21
22
23, 24, 25
ASSIGNMENT
Left positive
Center positive
Right positive
Subwoofer positive
Surround left positive
Surround right positive
Surround back left positive
Surround back right positive
Shield drains
No connection
Left ground
Center ground
Right ground
Subwoofer ground
Surround left ground
Surround right ground
Surround back left ground
Surround back right ground
Shield drain
No connection
1 13
25 14