Klip Xtreme KPM-580W, Руководство по установке

Страница: 2 / 21

Installation Manual
Thank you for choosing Klip Xtreme’s Universal Projector Ceiling Mount. The KPM-580W has been
designed to securely attach projectors or any other presentation device to the ceiling.
For support and to find out more about this and other new and exciting products recently
released, we invite you to visit us at www.klipxtreme.com.
INSTALLATION INSTRUCTIONS
Contents
Warning Statements
Installation Tools
Parts List
Features
Installing the Projector Mount
Wood Stud Installation
Concrete Ceiling Installation
Attaching the Projector Plate
Technical Specifications
Weight Limit
Maximum Projector Weight: 22 lb
THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST THREE TIMES THE WEIGHT
OFTHE PROJECTOR. OTHERWISE, THE CEILING STRUCTURE MUST BE REINFORCED.
English
Warning Statements
• Prior to installaling this product, you must read all instructions thorougly. Keep these installation
instructions in an easily accessible location for future reference.
• Proper installation procedure by a qualified service technician must be followed, as outlined in
these installation instructions. Failure to do so could result in property damage, serious personal
injury, or even death.
• Safety measures must be practiced at all times during the assembly of this product. Use proper
safety equipment and tools for the assembly procedure to prevent personal injury.
• Klip Xtreme does not warrant against damage caused by the use of any Klip Xtreme mounts for
purposes other than those for which it was designed or damage caused by unauthorized
attachments or modifications, and is not responsible for any damages, claims, demands, suits,
actions or causes of action of whatever kind resulting from, arising out of or in any manner
relating to any such use, attachments or modifications.
• At least two qualified people should perform the assembly procedure. Personal injury and/or
property damage can result from dropping or mishandling the projector.
• If mounting to wall studs or ceiling studs, make sure that the mounting screws are anchored into
the center of the wall studs or ceiling studs. Use of an edge-to-edge stud finder is recommended.
• Be aware of the mounting environment. If drilling and/or
cutting into the mounting surface, always make sure that there are no electrical wires in wall.
Cutting or drilling into an electrical line may cause serious personal injury.
Make sure there are no water or natural gas lines inside the wall where the mount is to be located.
Cutting or drilling into a water or gas line may cause severe property damage or personal injury.