KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | [email protected] | www.klinger.dk
Side 8
Ultrasonic Level Meter
Operation Manual
你
I. Product Introduction
Ultrasonic level meter (for material and liquid level measurement) is a
non-contact highly reliable and cost-effective material level measuring
instrument which is easily installed and maintained. It can meet most of the
material level measurement requirements without touching the medium. It is
a new generation ultrasonic level meter with fully independent property
rights developed by the company via years of hard work.
II. Commissioning
As the meter installation site environment is different, the basic information
of measurement to be done must be learnt before the operation of the ultrasonic
level meter, such as the measuring range, zero point, full scale and site
conditions. Therefore, the meter must be set before measurement and the
specific settings are detailed in “
Operating Instructions for Simple Settings
of Ultrasonic Level Meter Menus
” in Page 1.
Others:
please do not modify probe selection, parameter correction and
algorithm selection without permission.
