KLINGER Denmark A/S | Nyager 12-14 | DK-2605 Brøndby | +45 43 64 66 11 | [email protected] | www.klinger.dk
Side 3
Ultrasonic Level Meter
Operation Manual
Operating Instructions for Simple Settings of
Ultrasonic Level Meter Menus
Notes: as the product is renewed continuously, it cannot be ensured that the product
manual and installation manual are in line with the latest product.
The Company cannot inform every client of the change (if any) in product itself and its
operation instructions. Please directly contact the corporate sales personnel for any
needs. The change includes but is not limited to the following:
Product blind area, performance parameters, functions, structure, shape, color, etc.
Software functions, structure, display mode, operating habit, etc. Any operation on the
hardware must be conducted after power off.
Failures, like short circuit, caused by power-on operation are beyond the range of warranty.
The uncapping operations must be conducted after power off and no liquid is allowed to
enter in the meter. Any failure caused by the entering in of liquid is beyond the range
of warranty.
Normally the ultrasonic level meter produced by the company shall be installed as per
the installation requirements of the manual and after that, the equipment can be normally
used only after the following several parameters are set.
There are three buttons on the panel, via which the meter can be adjusted. The measured
values are displayed on the LCD screen after the adjustment.
SET
Button
Button
◇
Enter menu item
◇
Move cursor
◇
Confirm menu item
◇
Choose menu item
◇
Confirm parameter modification
◇
Modify parameter
(1)
After power-on display of the meter
, long press the set button (SET) for 2s to enter in
the main menu.
The menu modes include expert setting mode and simply setting mode.
The menu query table of simple setting mode is as shown in the table below.