wT 1207/11
Page 4
Storage instructions for KLINGER-PISTON VALVES and their spare parts
Valves and spares parts for valves may only be stored in dry storage rooms. Completely mounted
valves are to be stored in the „as–received“ condition (valve set to CLOSED position, connections
mould plugged). Spare parts for valves are to be handled with care, and should be kept in the original
packing furnished by the factory if possible during all storage.
If cover or shrink films are used, the appropriate measure must be taken to ensure that the atmosphere
inside the covers stays free of condensate water.
The appropriate protective measures are recommended for storage in dusty rooms.
To avoid confusion, all parts stored must be labeled as on the delivery note and stored in the correct
place.
Temperatures in the storeroom must not exceed the limit values of –20° C and +50° C and rapid
changes in temperature (causing condensation and perspiration) should be avoided.
Handling Regulations and Operating Instructions are supplied with, and should always be stored with
the products to ensure that important information and documents are appropriately passed on.
Corresponding documents are available for the identification of Klinger components ( spare parts code
sheet 13)
Our customers will be notified by circular letter of any modifications lying within the KLINGER domain
that affect storage requirements.
Damages owing to improper storage will release Klinger from any obligations as may be derived from
the warranty, guarantee and product liability.
Содержание KVMN
Страница 11: ...wT 1207 11 Page 11 Fig 1 Fig 2 Fig 3 Fig 4...
