6
Universal Extraction Station
UES-N 10.01.2019
7.
Operational Use
The device does not require
any special maintenance. Simply,
clean the workplace and empty
the waste drawer. Device malfunctions and
corrective action in such cases are included in
Sec-
tion 8
,
Table No.2
.
8.
Troubleshooting Guide
Table No.2
Problem
Possible reason
Corrective action
1.
The intake air volume is de-
The waste drawer is over-filled
Empty the waste drawer
creasing
2.
The intake air volume is de-
An obstacle object, reducing the
Unclog the extraction in-
creasing along with the noise
air flow got stuck within the in-
stallation
rise
stallation
remove the
barrier
object
3.
Larger amounts of pollutants
The waste drawer is not closed
Close the waste drawer
are emerging outside
tightly
correctly
9.
Maintenance
In the course
of operational use, check if the
waste drawer is filled up. The construction of the
Universal Extraction Station gives possibility of use without routine technical supervision.
10.
Occupational Health and Safety
Start up and the operational use
of
the Universal
Extraction Station
are
admissible
after getting
acquainted with the contents of the present Use and Maintenance Manual.
Any activities concerning the connection to the power supply system
ought to be executed exclusibely by an authorized person with valid electrical qualifi-
cations
.
Manufacturer is not responsible for any effects of operational use that is in contradiction with
the purpose of application of the appliance.
11.
Transport and Storage
The
appliance
ought to be stored in a dry room and in
conditions of appropriate ventilation. Du-
ring the transport it should be in vertical
(upright)
position and protected from being damaged,
scratched, indented, overturned and unwillingly displaced.
12.
Terms of warranty
The period of warranty for the purchased device is indicated in the “Card of Warranty”.
The warranty does not comprise:
● device failures caused during use which was in contradiction with the purpose
of operatio-
nal use and with the present Use and Maintenance Manual,
● mechanical / electrical damages and malfunctions caused by User,
● modifications and changes on the appliance undertaken by User on one’s own,
● inefficiency or malfunctions following from the normal operational exhaustion / wear.
Infringement of
the section 3 “Reservations of Producer” of the Use and Maintenance
Manual
and especially modifications undertaken by User on one’s own shall cause the
loss of warranty validity.