Klimawent
– the warranty of highest quality at attractive price
24.05.2019
Reel Exhaust Extractor
ALAN-U/E-HD-N
5 z 12
INSTALLING OF THE FAN TYPE FA
:
The fan has to be installed to the left wall of the framework. Following steps of installing:
1
.
put a sealing ring on the outlet connection of the reel extractor
2
.
in the bottom part, screw up 2 mounting bolts to fasten the solid bush to the left wall; put the fan support and
screw it up with these bolts, along with the solid bush and the framework wall;
3
.
put the fan (with the motor) onto the connection in such a way
– that the hangers holes (in the upper part of
the fan) are matching the holes in the left framework wall, and the hole in the support is suitable to the hole in
the fan housing. The fan inlet opening ought to be installed evenly onto the sealing ring;
4
.
finally, screw up the fan with the extractor to the hangers (by means of 4 bolts) and additionally to the support
(1 bolt); altogether 5 bolts M8x20.
FASTENING OF THE HOSE ASSEMBLY TO THE REEL
– Subsequent steps
:
1
.
Turn by hand the hose reel to a position
– providing easy access to install the hose assembly
2
.
Put the hose assembly inside the reel
– screw up the reducer to the reducer body with 2 screws (Fig. No.3
“Hose assembly - installing”)
3
.
Put (sleeve on) the hose onto the nozzle and secure it with a hose clamp protected with a rubber cover.
4
.
As a final point, turn slowly by hand the reel to such a position that the hose assembly is entirely wound on
the reel.
Fig. No.3
– Hose assembly – installing
MOUNTING THE EXTRACTOR AT THE WORKPLACE
The Reel Exhaust Extractor can be installed to the ceiling or by means of brackets to the wall or a supporting
column. Prior to installing check the load capacity of the constructional elements of the building where the
extractor has to be installed. The optimum mounting height of the extractor should be from 3 up to 3,5 metres.
For mounting use bolts M12 class 5,6.
Important is that the reel axis is positioned horizontally
.
To install the Reel Exhaust Extractor at the operational place:
1
.
Lift the whole Reel Exhaust Extractor to a suitable height and mount it under the ceiling or to the wall in a well
prepared place (caution
– the fully assembled extractor can weight above 100 kg).
2
.
Perform the adjustment of coiling / recoiling of the hose assembly, after the executed connection of the power
supply and of the ZE-ALAN-U/E control unit; The adjustment is described in Section 7 of the present Use and
Maintenance Manual “OPERATIONAL USE”.