2
cyclone separator
STORM-H
-{
1000
;
2000
;
5000
}
05.11.2019
1. Introductory Remarks
The purpose of the present
Use
and Maintenance Manual is to supply User with directions wi-
thin the range of application, installation, start-up and the use of the
STORM-H
cyclone se-
parator
.
Installing, start up and operational use are exclusively admissible after getting acquaint-
ted with the contents of the Use and Maintenance Manual
.
With regard to continuity of work carried on
improvement
of our
products, we reserve for oursel-
ves the revision possibility of the
draft and
technological changes improving their functional fea-
tures and safety.
Construction of the
STORM-H
cyclone separator meets
the
requirements of the current state
of te-
chnology
as well as the safety and health assurances included in:
2006/42/EC
Machinery Directive
of the European Parliament
and of the Council of
May 17
th
,
2006 on machinery
– amending the 95/16/EC (recast)
/
Journal of Laws EC L157 of 09.06.2006, page 24
/
2014/35/EC Directive
of the European Parliament and of the Council of 26 February, 2014
on the harmonisation of the
laws of
the Member States relating to the making available
on the
market of electrical equipment designed for use within certain voltage limits.
/
Journal of Laws
EC L96 of 29.03.2014
/
The appliance meets the requirements included in:
2009/125/EC (ErP)
Directive
of the European Parliament and of the Council of October 21
th
,
2009 establishing a framework for the setting of ecodesign requirements for energy-related
products /
Journal of Laws L 285 of 31.10.2009
/
327/2011
(
EU
)
Regulation
of
March 30
th
, 2011 on implementing
the
2009/125/EC Directive
of the European Parliament
and of the Council with regard
to ecodesign requirements
for fans
driven by motors with an electric input power between 125W and 500 kW
/
Journal of Laws L No. 90 of 06.04.2011
/
Additionally, the appliance meets following harmonized standard:
●
EN ISO-12100:2012
–
“Safety of
machinery
–
Basic concepts, general
principles
for design. Risk assessment and risk reduction”
●
EN 60204-1:2018-12
–
“Safety of machinery – Electrical equipment of machines
Part 1:
General requirements”
●
EN ISO 13857:2010
–
“Safety of machinery – Safe distances to prevent hazard
zones being re
ached by upper and lower limbs”
2. Application
STORM-H cyclone separators
are efficient in cleaning the
dry
air from contamination of dust of
particle diameter above 5
m. They belong to vacuum device group. Separation proceeds here
on the basis of centrifugal force phenomenon, whereby the extracted dust accumulates in the
waste container (located underneath the cyclone separator).
In case of coarse dust particles: the STORM-H cyclone separator can work as a final filter, whe-
reas, for fine dust extraction, it can be used as a pre-filter, where it is connected in a line before
the fine filter of similar volume flow.
The dust separating efficiency oscillates within limits 95
– 99%.
Separators are manufactured in versions:
–
with a fan
(STORM-5000-H, STORM-2000-H, STORM-1000-H) or
–
without fan
(STORM-5000 SOFT-H, STORM-2000 SOFT-H, STORM-1000 SOFT-H).
In a version without the fan, the feature resistance
of the separator
must be overcome by the
final fan of the cooperating filtering unit.
3. Reservations of Producer
A
.
Manufacturer accepts no liability for any consequences following from the operational use
that is in contradiction to the purpose of application.
B
.
Installing of any additional elements that are not belonging to the normal device structure
(or accessory set) is not acceptable.
Содержание 802O14
Страница 4: ...4 cyclone separator STORM H 1000 2000 5000 05 11 2019 STORM 1000 SOFT H STORM 2000 H...
Страница 5: ...5 05 11 2019 cyclone separator STORM H 1000 2000 5000 STORM 2000 SOFT H STORM 5000 H...
Страница 7: ...7 05 11 2019 cyclone separator STORM H 1000 2000 5000 Fig No 1 STORM H and STORM SOFT H Structure...
Страница 16: ...16 cyclone separator STORM H 1000 2000 5000 05 11 2019 NOTES...
