Klimawent 802O14, Руководство по эксплуатации и обслуживанию

Страница: 12 / 16

12
cyclone separator
STORM-H
-{ 1000 ; 2000 ; 5000 }
05.11.2019
Prior to start-up of the fan, check the connection between the motor and the PE protec-
tive cable and examine the electrical connections
( important is the
correct impeller rota-
tion sense according to the arrow on the housing ).
Electrical connections ought to be carried out according to the enclosed Connection Diagrams
and performed by an authorized person with adequate qualifications.
7. Operational Use
The appliance does not require any additional routine technical supervision after the start-up. In
case, the place of use is changed, repeat
the steps described in Section 6 on installing and adap-
tation of the ventilation system to the new application . The waste container is equipped with sight-
glasses for filling-up ratio monitoring. When the waste container is filled up, switch off the device
and empty the container according to the instructions on pages 12, 14. Having cleaned the con-
tainer, put it underneath the cyclone separator again.
Fig. No.7
– Waste container
CAUTION : Capacity of the waste container: 330 dm
3
Total capacity of waste
– up to the maximum sight-glass level:
285 dm
3
Maximum weight of waste: 500 kg .
TRANSPORT OF THE WASTE CONTAINER
1
.
The construction of the container is adapted for transporting by a fork-lift of forks not broader
than 100mm.
2 . Prior to transport, insert the forks into the transporting guide tunnels of the container suspen-
ded underneath the cyclone, (dimension and spacing
between the forks are as in the drawing
above), and subsequently release the clasp fasteners.
3 . Having removed the clasp fasteners, slide out the container from underneath the cyclone and
carry it into the dumping (reloading) site.
4 . During the transport handle with care
– THE WASTE CARGO IS HIGH WEIGHT –
500 kg .
xxx