Internal drying:
•
Please press the internal drying button (2) to activate this function. The drying process takes about one hour
and prevents the growth of mold.
•
During internal drying, the message "CL" is continuously shown on the display and all other modes are
turned off.
•
To stop the drying process, please press the button (2) again. The unit will automatically get back to the
operation with previous settings.
•
To stop the internal drying and switch the unit into stand-by mode, please press the On/Off button (8).
Timer:
•
Please press the timer button (1) to set the timer from 0 to 24 hours. It takes about 5 seconds until the mode
is set, during this time the timer key will not be available.
Please set the desired mode before.
•
When the unit is switched on, press the timer button to set the shut-off time as described above.
The timer
indicator will light up.
•
When the unit is switched off, press the timer key to set the switch-on time as described before.
The timer
indicator will light up and the selected time will be shown on the display.
Child Lock
•
Please press and hold the mode button (7) for 3 seconds to switch the child lock on or off.
Sleep Mode
:
•
Please press and hold the "Internal Drying" button (2) for 3 seconds to disable/enable sleep mode.
•
In sleep mode, all indication lights are turned off, the device works automatically at low wind speed and
target humidity 50%. The settings cannot be changed manually in sleep mode. Please switch on the timer
as described above, the sleep mode will be deactivated.
•
If the ambient humidity is high, the unit will dehumidify with the low wind speed; if the ambient humidity is
low, the compressor will stop working, only the ventilation function will be activated.
•
To deactivate the sleep mode, please press the mode key (7), internal drying key(2) or the on/off key(8).
Drainage
Water tank:
•
As soon as the water tank is full, the unit stops working, a warning signal sounds, the 'water tank full' indicator
(4) lights up on the control panel and error message “FL” will be shown on the display.
•
Please switch off and unplug the unit.
•
Please pull out the water tank carefully, open the lid of the water tank by
using the lever and empty the water.
•
Please clean the empty tank, close the lid and then carefully push it back
into the device.
Continuous drainage:
•
Please pull the plug out of the outlet.
•
Please remove the water tank from the appliance as described above and remove the drainage hose.
•
Carefully push the water tank back into the appliance without the drainage hose.
•
You will find the drainage opening on the back of the machine.
Please unscrew the cover of the drainage
opening and remove the stopper.
•
Please insert the drainage hose into the opening and place the other end of the hose into a container so that
the water can drain off continuously.
•
Please make sure that the hose is connected tightly to prevent the water from leaking.
•
Please press and hold the humidity level button (6) for 3 seconds to start continuous dehumidification.
Cleaning and maintenance
To avoid injuries, please switch off and unplug the appliance before starting service or cleaning.
Cleaning:
•
Please unplug the unit.
•
Please clean the unit with a dry and soft cloth. For heavy dirt, please use a slightly damp cloth.
•
Please do not use any chemical products (such as petrol, alcohol, etc.). The unit's housing and the unit's
surface may be damaged.
Cleaning the dust filter:
•
Please carefully remove the filter from the device.
•
To remove dust from this filter, please use a vacuum cleaner or to tap it out carefully.
•
If the filter is very dirty, wash it in water with neutral detergent, rinse well with water and let it dry.
•
Carefully put the filter back into the unit.
•
Do this process about every 2 weeks to ensure optimal performance of the device.
Storage
•
Please use internal drying before storage to avoid moisture formation in the device.
•
Please disconnect the power plug of the device and bundle the power cable at the cable storage (10).
•
Please empty the water tank, wipe out the tank with a cloth and reinstall it.
•
Please clean the air filter as described above and then reinstall it in the unit.
•
For storage, place the unit in an upright position and avoid direct sunlight.
