Klever BGS PRO 2800-17, Оригинальное руководство пользователя

Страница: 15 / 19

GB
15/19
Longer material standing out from the machine could lash out when being pulled in by
the chopping knife! Keep a safety distance!
Warning!
Always use the feeder if you try to push the material into the feeding tunnel. Do not use your
hands directly! Keep the feeder well after use.
Only insert as much material as will not block up the feed intake opening.
Chop garden waste that has been stored for some days and is wilted and damp alternately
with branches.
This will prevent the chopping knife from getting blocked up.
Do not fill into the shredder any soft material such as kitchen waste instead of compositing it.
Widely branched material with leaves must be completely chopped before any new material
is fed in.
Take care that the chopped material can freely fall from the discharge chute – danger of
backing up!
The ventilation slots must not be covered by the waste bag or the chopped material.
Emptying the collection box
The level of shredded material debris in the collection box can be checked by looking through
the notches on the upper face of the base frame. Always empty the collection box in good
time to prevent it from overfilling.
To empty it, proceed as follows:
a) Switch off the device at the ON/OFF switch.
b) Press the lock handle down.
c) Release the collection box.
D) Take the collection box out at the front.
PROCESS TO FOLLOW FOR THE CORRECT USE OF THE MACHINE
Adjusting the counter knife (Fig.12)