Klever BGS PRO 2800-17, Оригинальное руководство пользователя

Страница: 11 / 19

GB
11/19
11. lock handle 12.13.reversing switch
14: Accessory 15.Locking knob
Assembly (Fig. 2)
Scope of delivery
1x Instruction manual
1x Spanner
（
5mm
）
1x Silent shredder
1x Collection box
1x Base frame
2x supporting Wheel set
2x front wheel set
1x Small parts bag
1x Clear material rod
1. Take all parts out of the package. You will find all the parts and accessory. (Fig.2)
2. Fit the supporting wheel sets to the base frame with the aid of two screws (M6*45). (Fig.
3)
3. Use the other spanner (The Spanner was not included in accessory, Customer should
prepare by themselves) to mount wheels to the base fame using two wheel shafts, two
grommets, two spring grommets and two screws(M8). Assemble cap by pushing in on by
hand. (Fig.5)
4. Stand and put hands in position as shown in (Fig. 6). Lay the motor unit on the base
frame by placing protruding supports of the motor. Then fixed the motor and the base
frame with 6 screws. (you can find in accessory)
5 Slide the collection box back to the base frame. Ensure that the collection box runs
above the guide rails. (Fig. 8) Push the collection box into the base frame, Then Lock the
collection box with lock handle in position by pushing upwards. (Fig. 8)
6 Install the adjuster in a clockwise. (Fig.9
）