KLEVA QUICKTIME GOURMET GRILL, Руководство пользователя

Страница: 18 / 20

SOLVING ISSUES
16
PROBLEM POSSIBLE REASON SOLUTION
Unexpectedly, the appliance does not
work any longer.
“OFF” flashes on the touchscreen:
The automatic shut-off has been
triggered.
The touchscreen is dark:
The connection to the power supply is
interrupted.
“Er” and a number is displayed: An
error occurred.
For your safety, the appliance is equipped
with an automatic shut-off feature, that will
be triggered after 1 hour of continuous use
without any input. In this case an unusual
acoustic signal sounds. If you wish to
operate the appliance further on, simply
press the ON/ OFF button and enter the
desired settings again.
Ensure that the power cord is still
connected to the power outlet. When
using an extension cord, check the
connections of the extension cord.
Always ensure that nobody gets entangled
in the power cord or pulls at the power
cord. Do not let the excess cord of the
extension cord hang down from the table
Solve the problem according to the hints,
given below.
The storage tray of the temperature
probe does not fit into the control panel.
The temperature probe is not inserted in
the correct orientation.
The cable or plug of the temperature
probe is not inserted correctly.
The inner tray is not installed correctly
in the storage tray.
TIP: If you find it difficult to insert the temperature probe correctly in the inner tray, for
storage, it is best to place the inner tray holding the temperature probe beside the
appliance and insert the empty storage tray into the control panel of the appliance.
The ring in the handle of the temperature
probe must face upwards, when inserted
into the inner tray.
Gently press the tip of the temperature
probe into the groove of the inner tray.
Wrap the cable loosely around the cable
support and push the plug of the cable
gently down. The parts of the temperature
probe may not protrude past the rim of the
inner tray.
(See: ‘Assembling the Appliance’).
The inner tray may not protrude past the
storage tray. When inserted correctly, the
handle of the temperature probe will be
seen in the excavation of the storage tray
front plate with the ring in the handle
facing upwards.