KLEVA QUICKTIME GOURMET GRILL, Руководство пользователя

Страница: 17 / 20

SOLVING ISSUES
15
PROBLEM
POSSIBLE REASON SOLUTION
The appliance doesn't react to your
input, only if you push hard.
There may be fat on your finger tip or
your skin is very dry.
Wipe your finger tip with a moist cloth.
Then try again. The appliances gives an
acoustic signal with each accepted input.
You cannot open the lid. The lid is locked to the base. Slide the height control clip to the “OPEN”
position. Do not use excessive force.
You cannot close the lid completely. The height control feature is in use. Hold the lid by the handle and pull the
height control clip to the “OPEN” position.
Then try again.
You cannot fold back the lid to the flat
position.
For operating the appliance in the open
position, the lid is held in the upright
position by a lock in the hinge.
Hold the lid by the handle. While pressing
the hinge release button at the right side
of the lid hinge, slowly fold back the lid
(see: ‘Positioning the Lid’).
The desired grilling temperature is not
available.
If you have selected a program, the
range of possible grilling temperature
values may be restricted.
In the program area, select a program,
enabling the desired temperature values.
Alternatively, deselect any programs and
adjust the required grilling temperature
manually (range: 80°C to 240°C).
When using the core temperature
control feature, the desired core
temperature is not available.
A program is selected that does not
enable the desired core temperature.
With some programs, the range of
possible core temperature values is
restricted.
In the program area, deselect the used
program or select another program.
After switching on the appliance, you
notice a burnt smell. Maybe, smoke
escapes from under the grilling plates.
The appliance is heated for the first time.
In this case, there is no need to worry.
The heating chambers (under the grilling
plates) or the grilling plates are dirty.
To prepare the appliance for the very first
operation, select 240°C (maximum grilling
temperature) and, with the lid closed,
leave the appliance to operate for approx.
10 minutes.
Switch off and unplug the appliance
immediately. Leave the appliance to cool
down. Then remove the grilling plates and
clean the heating chambers and grilling
plates of base and lid thoroughly.
When removing the grilling plates after
grilling, ensure that juices from the grilling
plates will not drip into the heating
chambers. Ensure that the heating
chambers and the bottom of the grilling
plates are completely clean, before
reassembling the appliance