Kleinn Air Horns X3-KIT, Руководство по установке

Страница: 27 / 40

X3-KIT
Installation and Operation Manual
Go to Table of Contents PG 27/40 REV: BETA (4/25/2019)
8.7.3. Install Air Compressor Brackets (X3-101, 202 & 204) on chassis tube, using hardware #H5, H6, H8, H9,
H10, H11, H12, H15 & H16 as shown below. Once Bracket is properly positioned, final torque all bolts.
NOTE: Ensure forward edge of clamp is butted against weld bead on chassis, which increases clearance
between back of X3-101
and springs. There should be a minimum ¼” clearance to coil spring.
Figure 17 – Front Air Compressor Bracket stops at corner Gusset (Shown with Air Compressor)
Figure 18 – Installing Air Compressor Bracket, Exploded View
FRONT
Bracket butts up
to Frame Gusset
FRONT
X3-101
H5 (3)
X3-204
X3-202
H11 (2)
H10 (5)
H9 (5)
H6 (2)
H15 (3)
H16
H8 (5)
H12