WARNING:
Attach the tether only to the
rear metal ring
of the harness!
Use the front metal ring
for attaching a leash.
Proper handling:
Loosen the straps and carefully fit the safety harness
onto your dog. Adjust the harness so that it is snug,
but not too tight.
Always pass the ends of the straps
through the buckle one more time for added security.
Make sure the vehicle seatbelt is fastened and then
use the locking carabiner to attach the tether to it.
When transporting your dog in the vehicle, always
make sure to hook the swivel eye bolt snap of the
tether to the
rear metal ring
of the harness. Simply
unhook the snap to remove your dog.
The front metal ring can be used to attach a leash.
Safety notice:
Always transport your dog on the back seat of the
vehicle – preferably behind the (unoccupied) front
passenger seat.
Care and cleaning:
Remove any accumulated dirt and hair, and use
neutral soapy water to occasionally wash the fittings,
chest plate and harness.
Important notice:
Regularly inspect your ALLSAFE dog safety harness
for wear, tears and damage, and replace the entire
safety harness as necessary.
Edition: July 2013
Item No.
15380100
15380000
15380200
15380300
Size
S
M
L
XL
Weight
15 oz (410g)
24 oz (670g)
26 oz (740g)
27 oz (770g)
SAFETY NOTICE:
WARNING:
Always pass the ends of the
straps through the buckle one more time
for added security (see Figure E).
The tether strap should be no longer
than the width of your hand.
