WARNING:
Attach the tether only to the
rear metal ring
of the harness!
Use the front metal ring
for attaching a leash.
Proper handling:
Open click-fastener, loosen the straps and carefully fit the safety
harness onto your dog. Adjust the harness so that it is snug, but
not too tight.
Always pass the ends of the straps through the
buckle one more time for added security.
Make sure the vehicle seatbelt is fastened and then use the locking
carabiner to attach the tether to it.
When transporting your dog in the vehicle, always make sure to
hook the swivel eye bolt snap of the tether to the
rear metal ring
of the harness. Simply unhook the snap to remove your dog.
The
front metal ring can be used to attach a leash.
Safety notice:
Always transport your dog on the back seat of the vehicle –
preferably behind the (unoccupied) front passenger seat.
Care and cleaning:
Remove any accumulated dirt and hair, use neutral soapy water to
occasionally wash the fittings, chest plate and harness.
Important notice:
Regularly inspect your ALLSAFE COMFORT dog safety harness for
wear, tears and damage, and replace the entire safety harness as
necessary.
Edition: KM_OKT20
WARNING: DANGER OF INJURY!
Please keep your dog away from
the carabiner while entering or
leaving the car.
Raise or cover the
remaining tether with the carabiner.
Item No.
15390100
15390000
15390200
15390300
Size
S
M
L
XL
Weight
16 oz (450g)
25 oz (710g)
27 oz (780g)
28 oz (810g)
SAFETY NOTICE:
WARNING:
Always pass the ends of the
straps through the buckle one more time
for added security.
The tether strap should be no longer
than the width of your hand.
