ENGLISH
1.
AC Current: < 200A
Features:
REL
HOLD RANGE
• Center wire in guides for best accuracy.
• Opposing currents cancel (use line-splitter when necessary).
2.
DC Voltage: < 1000V DC
Features:
REL
HOLD RANGE
G.H. Battery Replacement (1 x 9V)
• When
indicator is displayed on the LCD,
battery must be replaced.
• Remove the back screw and replace the single 9V battery
observing polarity.
• Turn off device before removing back cover.
3.
AC Voltage: < 750V AC
Features:
REL
HOLD RANGE
AUTO
V
DC
AUTO
V
DC
69204
AUTO
V
DC
1
2
5
6
4
3
Auto Power-Off
• Device will power off after 30 minutes non-use.
• Turn the dial or press a button to wake.
FUNCTION INSTRUCTIONS
FEATURE DETAILS
A.
Use CAT III rated leads or higher.
Do not attempt to measure more than 750V AC or 1000V DC
or any current on lead input.
B.
Keep hands below line when measuring high current levels.
C.
Functionality Button
• Switch between AC and DC.
• Switch between ,
Ω
, and
.
D.
Auto / Manual Range
• Press repeatedly to cycle through manual ranges.
• Hold for 2 seconds to return to auto ranging mode.
•
AUTO
is displayed on LCD only during auto ranging mode.
E.
Relative Reading Mode
• Press to store current value.
• Display will now show the difference between the
stored and live readings.
• Press again to return to live reading.
F.
Data Hold / Backlight
• Press to hold current value on display.
• Press again to return to live reading.
• Press button for 2 seconds to activate or deactivate backlight.
• Using light drains the battery significantly.
• Backlight turns off automatically after 15 seconds.
69204
AUTO
V
DC
1
B
C
D
A
H
E
4
F
G
On Back
