Kleenmaid TX768A, Инструкция по использованию и уходу

Страница: 7 / 20

7
Connecting up your machine
Waste water drain
Connect up the drain hose, after fitting
the hose hook supplied in the machine
(Diagram 8.1) :
• either placing into a laundry tub
• or permanently into a stand pipe.
If your drain installation is connected to a
stand pipe and a siphon break kit is not
fitted, ensure that the connection between
the drain hose and the stand pipe is not
airtight. We strongly recommend that an air
gap be left between the drain hose of the
machine and the stand pipe
(Diagram 9) .
In these circumstances, the hooked end of
the drain hose should be between 65 and
90 cm above the bottom of the machine.
Note: make sure that the drain hose is
securely attached to prevent it releasing in
service and causing a flood.
The waste water can be drained on to the
ground, so long as the drain hose passes
through a point between 65 and 90 cm
higher than the bottom of the machine
(Diagram 8.2) .
Power supply
The electrical installation must comply with
Australian standards and the requirements
of the local Electrical Authorities.
240V 50hz 10A.GPO
Recommendations for the electrical
installation of your machine.
• Do not use extension leads, adaptors or
multiple plugs ;
• Never remove the earth connection ;
• The socket outlet must be readily
accessible but out of the reach of children.
We cannot be held liable for any
incident resulting from improper
earthing of the machine or incorrect
electrical connection.
For your own safety, please follow these
instructions
Diagram 8.1
Diagram 9
If in doubt, get in touch with your local plumber
Diagram 8.2