DW13W & DW13X
The DW13 is the same as the DW8. When installing the dishwasher, adjust
the legs down so that there is approximately a 12mm clearance under the
dishwasher. Fit the noise and dust seal to the front edge of the kick plate.
This single rubber strip is supplied inside the dishwasher.
Demonstrate the upper basket as described in the DW12I. Demonstrate the
detergent dispenser and rinse aid indicator as described previously.
Demonstrate to the customer how to activate and de-activate the condenser
drying, this is activated by pushing the condenser drying button and at the
start of the cycle, if the wash and dry indicators flash for 2 seconds, the
condenser drying is activated. If only the wash indicator flashes, the
condenser drying is de-activated.
DW14I
The DW14I is similar to the DW9 other than some program changes. I’ve
included a copy of the owners manuals to familiarise yourselves with the
differences. Internally the baskets are the same as the DW13 and again
make sure that you demonstrate the detergent dispenser, the rinse aid
dispensers, rinse light and the upper basket adjustment. Make sure you
demonstrate how to activate and de-activate the condenser drying.
Installation is now the same procedure as the DW12. (i.e. adjustable rear
legs)
DW10W & DW10B
When installing the dishwasher, adjust the legs down so that there is
approximately a 12mm clearance under the dishwasher. Fit the noise and
dust seal to the front edge of the kick plate. This single rubber strip is
supplied inside the dishwasher.
