CONTROL PANEL
1.
Small element - top left
2.
Large element - top right
3.
Large element - bottom left
4.
Small element - bottom right
Note: For safety purposes, all elements are indicated by a grey ring on the
surface of the cooktop. Do not touch the cooktop surface inside this ring once
the element is energised as you may risk serious injury.
5.
Control No. 2 element
6.
Control No. 1 element
7.
Control No. 3 element
8.
Control No. 4 element
9.
Pilot lamp - This light will glow red when any element is energised.
10.
Residual Heat Lamps - Each element has a residual heat indicator lamp. This
lamp will glow red as the element is energised and will remain on after the
element has been turned off. The residual heat lamp will extinguish once the
cooktop surface temperature has reduced to below 50oC.
WARNING: DO NOT TOUCH THE COOKTOP SURFACE UNTIL YOU ARE
CERTAIN THAT THE TEMPERATURE HAS REDUCED TO A SAFE LEVEL.
