Troubleshooting guide
4.4
Convection Fan Problems
Anomaly
Possible Cause
Corrective Action
section
Fan does not run
No power supply
Bad connection
Mode selector not
switching
Check the connectors and the
harness
Replace switch selector
7.17
Fan does Not run
Power supply ok.
Blocked rotor
Replace fan
7.4
Burned coil
Replace fan
7.4
Noisy fan
Lose attachment
screws on cooling
assembly
Check attachment screws
Check nut on working fan for
tightness or replace it
--
Troubleshooting guide
4.5
Door Lock Problems
Anomaly
Possible Cause
Corrective Action
section
Door lock control does
not run
No power supply.
Bad connection
Selector broken.
Check the connectors and the
harness.
Replace switch selector
7.17
Motor latch micro switch
not switching.
Replace the motor micro switch.
7.9
Door lock control does
not run
Power supply ok.
Locked rotor.
Replace motor.
7.8
Burned coil.
Replace motor.
7.8
Noisy.
Defective mounting of
door lever mechanics.
Check lever mechanism of door lock.
Lubricate all working parts with
silicon grease
--
The control doesn’t
unlock the door after self
cleaning and the lock
symbol on the display is
steadily on.
The Oven temperature is
still beyond the safety
unlock value.
Wait for the temperature to drop
below the threshold.
--
Check all the connections between
the sensor and the Electronic
control.
--
Check the temperature sensor.
If is damaged, replace it.
7.14
Check the Electronic Control.
If is damaged, replace it.
7.19
The Oven had been
locked by means of the
child lock procedure.
Use the same procedure to unlock
the door.
--
