CONNECTION OF THE OVEN
L
N
SECURING THE OVEN TO THE CABINET
1.
Fit oven into the cabinet recess.
2.
Open the oven door
3.
Secure the oven to the kitchen cabinet with two
distance holders "A" which fit the holes in the
oven frame and fit the two screws
"B".
Note: Parts A and B as above, are supplied
with
the oven and should not be discarded when
unpacking the oven.
I
MPORTANT
The appliance must be installed by an authorized technician and checked before use. The
manufacturer is not responsible for any damage that might be caused by defective
placement, and installation by unauthorized personnel.If the oven is to work properly, the
kitchen housing must be suitable. The panels of the kitchen unit that are next to the oven
must be made of a heat resistant material. Ensure that cabinetry units which are made of
glue and veneered wood can withstand temperatures of at least 120 ºC. Plastics or glues
that cannot withstand such temperatures will melt and deform the unit. Once the oven has
been lodged inside the unit, electrical parts must be completely insulated. This is a legal
safety requirement. All guards must be firmly fixed into place so that it is impossible to
remove them without using special tools. Remove the back of the kitchen unit to ensure an
adequate current of air circulates around the oven. The oven must have a rear gap of at
least 45 mm.
1
5