Kleenmaid KFL1600, Инструкция по эксплуатации

Страница: 17 / 36

130715
program to end the washing procedure.
The machine will automatically calculate the starting
time, depending on the selected program. End of
washing may be delayed for maximum 20 hours, in
30 minute intervals for the
fi rst two hour delay, and
in hourly intervals for the rest.
Function is set by pressing or keeping pressed the
SELECTION knob (C) until the required time to end
the washing appears on display.
Caution: If Clean water sensor is engaged, the
program may last longer for extra rinsing time.
In case you wish to change or suspend the end of
washing time after starting the machine with the
START knob (F), you may do so by pressing the
MENU (B) knob. The end of washing time appears;
using the SELECTION button (C) reset the selected
time.
Audible warning
Sound signal beeps when a knob is pressed (function
selection), and it also signals the end of washing
program and reports failures.
In default setting the sound signal is on. You may select
to switch the sound signal off, or increase volume.
Legend: sound signal off
normal sound signal setting
increased volume setting
If you switch the sound signal off the display
indicates relevant symbol .
Child lock
Operation of the washer may be protected against
accidental changes of programs or functions. The
function is activated by pressing the START/PAUSE
button (F).
Temporary disengagement of the function
(during operation):
- Keep the MENU knob (B) pressed for 4 seconds,
relevant symbol fl ashes on the display.
17