Instructions for use, installation and connection
8
Automatic operation with the preset
period and the end of operation
Turn button
1
to the position "period of operation"
and by turning button
2
towards
"+"
or
"-"
set the
period of cooking.
Then turn button
1
into the position "end" and the
display indicates the nearest possible end of
operation time. Set the desired end of operation
time by turning button
1
towards
"+" or "-"
. The
symbol
S1
is off if the end time is greater than the
current time + the preset period of operation.
The oven starts operating automatically according
to the preset times.
Example
Current time = 12:00, operation interval was set
at 1:30 and the end of operation at 14:00. This
means that the oven will start operating at 12:30.
Errors in setting the time
If the selected end time falls shorter than the
current time + period of operation, this is signaled
by the sound alarm and the flashing symbol
S3
.
Preset times have to be corrected and adjusted
(the best procedure is to turn button
1
into the
position "manual" and repeat the complete
procedure).
Alarm timer
To activate the timer, turn button
1
to the position
"timer". This timer functions only as a warning
signal and does not switch off the oven.
Set the desired time by turning button
2
towards
"+" or "-"
. Symbol
S2
is on.
Once the desired alarm time is selected, the time
countdown starts after the 7 second lapse. If
button
1
remained in the position "timer" the
display indicates the countdown of preset time.
The remaining time may be corrected with button
2
, while button
1
must remain in the position
"period of operation".
The expiry of the set period is signaled by the
alarm, which is switched off automatically after 7
minutes, if it was not switched off before by
turning button
1
in any position other than the
actual one. The symbol
S2
is off.
Button (1) in the position of current time
This position is neutral and indicates current time.
It is used in case you wish the current time to be
indicated on the display. The clock is for example
set to automatic operation. If button
1
is set to the
position "end" the display reads the end of
operation time, and if button
1
is turned to the
position "current time" the display will read
current time.
Sound alarm volume
When all functions are off (only the current time is
displayed) it is possible to select
3
different
volume settings of the sound signal. Turn button
1
to the position "manual" and wait for 7 seconds.
If button
2
is turned prior the expiry of this period,
the current time will be altered! Next, turn button
2
towards
"-"
and keep it in this position. The
first volume level is sounded. Release button
2
and turn again towards
"-"
for the next volume
level, etc.
The last selected level is stored as default.
Volume level may be reset anytime.
Deleting all timer adjustments
All the time settings except the alarm timer may
be deleted at
any time
by turning button
1
to the
position "manual".
Preset programs are automatically cancelled and
the clock returns to the conventional (manual)
mode.
Using the clock in combination with
oven
To use the clock in combination with oven,
the first step is to switch the oven on and set
the desired baking mode and the temperature.
Only after that you may proceed setting the
clock functions. After the completion of
baking switch the oven off.
