Water Supply And Drain
Cold water connection
Connect the cold water supply hose to
a threaded 3/4
(inch) connector and
make sure that it is fastened tightly in
place.
If the water pipes are new or have not
been used for an extended period of
time, let the water run to make sure
that the water is clear. This precaution
is needed to avoid the risk of the
water inlet
becoming
blocked and
damag
ing
the appliance.
safety
supply
hose
ordinary
supply
hose
About the safety supply hose
The safety supply hose
has
double walls. The hose's system guarantees its
intervention
to block
the flow of water in case of the supply hose breaking and
when the air space between the supply hose itself and the outer corrugated hose is
full of water.
How to
c
onnect the safety supply hose
1.
Pull
t
he safety supply hose completely out from storage compartment located at
rear of dishwasher.
2.
Tight
ly
screw
the safety supply hose to
a
tap
with 3/4
inch
thread.
3.
Turn water fully on before starting the dishwasher.
WARNING
A hose that attaches to a sink spray can burst if it is installed on the same
water line as the dishwasher. If your sink has one, it is recommended th
a
t
the hose be disconnected and the hole plugged.
How to disconnect the safety supply hose
1.
Turn off the water.
2.
Unscrew the safety supply hose from the
tap
.
16
