The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table .
"
Use more detergent, or change your detergent.
Rearrange
the
items
so
that
the
spray
arm
can
rotate
freely.
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft water and select
a shorter cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-load
the
dishes
properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do
not
empty
your
dishwasher
immediately
after
washing.
Open
the
door
slightly
so
that
the
steam
can
escape.
Begin
unloading
the
dishwasher
only
once
the
dishes
are
barely
warm
to
the
touch.
Empty
the
low
basket
first.
This
prevents
water
from
dropping
off
dishes
in
the
upper
basket.
In
short
program
s
the
washing
temperature
is
lower.
This
also
lowers
cleaning
performance.
Choose
a
program
with
a
long
er
washing
time.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerful enough.
Not enough detergent
was dispensed.
Items are blocking
the path of sp ay arms.
r
The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets
to get blocked.
r
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes
block
detergent
cup
lid
.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
Overflow.
When some malfunctions come on, the appliance will display error codes to warn you:
Long
filling
time.
Water tap
is
not
open
,
or
water
intake
is
restricted,or
water
pressure
is
too
low.
Some
element
of
dishwasher
is
leak
ing.
E1
E4
E8
Open
circuit
in
distribut
ion
valve.
Failure
of
orientation
of
distribut
ion
valve.
EC
PCB failure
Fault of PCB data transmission.
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.