When
not
in
Use
for
a
n Extended Period
It
is
recommend
that
you
run
a
wash
cycle
with
the
dishwasher
empty
and
then
remove
the
plug
from
the
socket,
turn
off
the
water
supply
and
leave
the
door
of
the
appliance
slightly
open.
This
will
help
the
door
seals
to
last
longer
and
prevent
odours
from
forming
within
the
appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
Before
cleaning
or
performing
maintenance,
always
remove
the
power supply
plug
from
the
socket.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water an a little
vinegar, or a cleaning product made specifically for
dishwashers.
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
After Every Wash
The
installation
of
the
pipes
and
electrical
equipment
should
be
performed
by
professionals.
Electrical Shock Hazard
Disconnect electrical power before
installing dishwasher.
Failure to do so can result in death or
electrical shock.
Installation preparation
The
installation
position
of
dishwasher
should
be
close to
the
existing
inlet
and
drain
hoses
and
power
cord.
One
side
of
the
cabinet
sink
should
be
chosen
to
facilitate
the
connection
of
drain
hoses
of
the
dishwasher.
Note:
please
check
the
accompanying
installation
accessories
(hook
for
aesthetic
panel,
screw
s
etc
)
●