Kleenmaid CCT3010, Инструкция по использованию и гарантийные обязательства

Страница: 19 / 24

Adjust the bracket position to suit
the thickness of the
work surface
.
1.Bracket
2.Drilling
3.Screw
A.Worktop B.
cooktop
bottom 1.Bracket 3.Screw
Cautions
1. The ceramic cook top must be installed by qualified personnel or technicians. If
necessary, p
lease
see the "Support" section on our website for suitably
qualified installers. Unqualified persons should not attempt to install this
appliance.
2. The ceramic cooktop sh ould not be mounted to cooling equipment,
dishwashers
or
rotary dryers.
3. The ceramic cook top shall be installed such that sufficient heat radiation can be
ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface sh ould be heat
resistant.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to
heat.
6. A steam cleaner is not to be used.
7.
This c
ooktop
can be connected only to a supply with system impedance no more
than 0.427 ohm. I f necessary, please consult your supply authority for system
impedance information.
L ocating the F ixing B rackets
The unit should be placed on a stable, smooth surface (use the packaging as
padding
). Do not apply force onto the controls protruding from the
cooktop
.
Fix the
cooktop
on the work surface by
attaching the
four brackets
to
the bottom
of cooktop after checking placement within the cutout (see picture).
19