5W metal oxide power resistors, 600V polypropylene film/foil and polyester
military capacitors
1.
LOW INPUT: (1)
The input jack will accept signals from low impedance guitar pickups, Be sure to
use a high-quality shielded cable to connect the guitar to the amplifier
2.
HIGH INPUT
:
(2)
The input jack will accept signals from high impedance guitar pickups, Be sure to
use a high-quality shielded cable to connect the guitar to the amplifier
3.
Gain
(3)
Preamp Gain levels control
4.
Tones
:
(4)
Tones level controls
5.
VOLUME
:
(5)
Volume Controls. The final level adjustment should be made after the desired
sound has been achieved
6.
Headphone
(6)
3.5mm headphone ‘s jack. User can plug In-Ear headphone of Ipod.
7.
STANBY
:
(7)
Green means working, Red means standby.
8.
POWER
:
(8)
Red means on,
9.
PENTODE/TRIODE SW
(9)
5w/2.5w power switch
10.
OUTER SPEAKER JACK
(10)
Provide for connection of external 8ohm speaker cabinet.
11.
EMBEDDED ATTENUATOR
(11)
The attenuation will increase clockwise, but sound will be smaller.
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS