
footswitch jacks for changing channels and switching reverb in/out
1. INPUT: (1)
The Input jack will accept signals from all types of guitar pickups, Be sure to use a high-quality
shielded cable to connect the guitar to the amplifier
2. LEAD/NORMAL
:
(2)
Allows selection of the Lead or Normal channel
NOTE
:
Channel selection may also be achieved by the remote footswitch. If remote selection is
desired, the channel switch must be in the ”in”(lead) position
3. VOLUME
:
(3)
Normal channel volume control
4. GAIN
:
(4)(LEAD)
Over driver channel level controls
5. VOLUME
:
(5)(LEAD)
Controls the over driver channel (Lead channel) volume. The final level adjustment should be made
after the desired sound has been achieved
6. REVERB
:
(6)
Reverberation is an echo effect. Rotate clockwise to increase the effect
7. BOOST SWITCH
:
(7)
“Boost”The overall system gain; Depress to the “in” position to activate
8. BASS
:
(8)(EQ)
Passive tone controls that regulate high, mid, and low frequencies respectively
9. MIDDLE
:
(9)(EQ)
10. TREBLE
:
(10)(EQ)
11. MASTER
:
(11)
12. PRESENCE
:
(12)
Presence volume control
13. SEND (13)(EXTERNAL)
Output for supplying signal to external effects or signal processing equipment.
14. RETURN (14)(EXTERNAL)
Input for returning signal from external effects or signal processing equipment
15. STANDBY / LIGHT(15)
Green means working, Red means standby.
16. POWER SOCKET and ON/OFF
Switch to position “I” to activate;”O” to OFF