MultiBase U20 EB | Code number 588.51.740-003 | Version 0
4
.2019
Page 9 of 9
Description Single platform (EB)
We reserve the right to change this specification without further notice
Multiparking system providing independent parking spaces for
2 cars (EB) one on top of the other each. On special conditions
the upper platform may be used as parking space.
Dimensions are in accordance with the underlying dimensions of
parking pit, height and width.
The parking bays are accessed horinzotally (installation deviation ± 1%).
Vehicles are positioned on each parking space using wheel stops on
the right side (adjust according to operating instructions).
Operation via operating device with key interlock using master keys.
Operating instructions are attached to each operator's stand.
General description:
– 2 telescopic lifting columns at rear with hydraulic cylinder
(mounted to the floor)
– 2 telescopic lifting columns at front (mounted to the floor)
− 1 upper platform (for floor coating to be provided by the customer,
e.g. sand layer/stone layer, please KLAUS Multiparking).
Maximum weight of customer coating 250 kg/m
2
[5933 lbs/ ft
2
].
Optional design with platform sheet metal plates from
KLAUS Multiparking, against surcharge.
− 2 lower platforms
− 1 mechanic synchronization control system (to ensure
synchronous operation of the hydraulic cylinders while lowering
and lifting the platform)
− 2 hydraulic cylinders
− Dowels, screws, connecting elements, bolts, etc.
− The platforms and parking spaces are end-to-end
accessible for parking!
Multiparking system consisting of:
– Platform base sections
– Adjustable wheel stops
– Canted access plates
– Side members
– Cross members
– Screws, nuts, washers, distance tubes, etc.
Lower platforms consisting of:
– Hydraulic cylinder
– Magnetic valve
– Hydraulic conduits
– Screwed joints
– High-pressure hoses
– Installation material
Hydraulic system consisting of:
– Operating device (Emergency Stop, lock, 1master key per
parking space)
– Control box with lockable main switch
Electric system consisting of:
– Hydraulic power unit (low-noise, installed onto a console with a
rubber-bonded-to-metal mounting)
– Hydraulic oil reservoir
– Oil filling
– Internal geared wheel pump
– Pump holder
– Clutch
– AC-motor
– Contactor (with thermal overcurrent relay and control fuse)
– Test manometer
– Pressure relief valve
– Hydraulic hoses (which reduce noise transmission onto the
hydraulic pipe
Hydraulic unit consisting of:
KLAUS Multiparking reserves the right in the course of technical progress to use newer or other technologies, systems, processes,
procedures or standards in the fulfillment of their obligations other than those originally offered provided the customer derives no
disadvantage from their so doing.
– Covering plates
– Side members
– Cross members
− Tray for customer coating, optional platform sheet metal plates
from KLAUS Multiparking
– Screws, nuts
Upper platform consisting of:
Page 1
Section
Dimensions
Car data
Page 2
Width
dimensions
Page 3
Width
dimensions
Page 4
Function
Approach
Load per
parking sp.
Page 5
Load plan
Page 6
Pit edge
Page 7
Electrical
installation
Technical
data
Page 8
Tec. data
To be perfor-
med by the
customer
Page 9
Description
