530 [17‘-5‘‘] for vehicle up to 5.00 m [16‘-5‘‘] long
(550 [18‘-1‘‘] for vehicle up to 5.20 m [17‘-1‘‘] long)
x
100
[3‘-3‘‘]
70
[2‘-4‘‘]
70
[2‘-4‘‘]
Sh
af
t f
or
m
ai
nt
en
an
ce
75 [2‘-6‘
‘]
Water drainage
Grounding
KLAUS Multiparking GmbH
Hermann-Krum-Straße 2
D-88319 Aitrach
Fon +49 (0) 7565 508-0
Fax +49 (0) 7565 508-88
[email protected]
www.multiparking.com
MultiBase
U20
EB
| Code
number
588.51.740-003
| Version
0
4
.2019
Wind zone 3 from 0.47 kN / m
2
[9.8 lbf / ft
2
] in accordance with
DIN EN 1991-1-4.
Snow load zone 3 from 6.86 kN / m
2
[143 lbf / ft
2
] in accordance with
DIN EN 1991-1-3.
Environmental conditions
12
5
6
7
11
8
10
9
PRODUCT DATA
U20 EB
Type
U20 EB-425
[
13‘-11‘‘
]
car height
165
[
5‘-5‘‘
]
Type
U20 EB-495
[1
6‘-3‘‘
]
car height
200
[
6‘-7‘‘
]
425
[
13‘-11‘‘
]
385
[
12‘-8‘‘
]
495
[
16‘-3‘‘
]
455
[
14‘-11‘‘
]
Security fences are mounted in the side and rear area,
under certain structural conditions these can be dispensed
with. This requires consultation with KLAUS Multiparking.
The upper platform is a frame construction. Flooring can
be provided by the customer (e.g. soil/turf, sandbed/turfblock,
sandbed/marble, etc.). Maximum weight of customer coating
250 kg/m
2
[5933 lbs/ ft
2
].
The upper platform is at ground level and is traversible when
in lowered position (vehicle load: 2600 kg [5730 lbs] maximum,
wheel load: 650 kg [1430 lbs] maximum). On special conditions
the upper platform may be used as parking space.
A separate shaft for maintenance is required on site (with
shaft covering, shaft ladder and passage to the pit). Access
to the shaft for maintenance must be secured on site – this
requires consultation with KLAUS Multiparking. The hydraulic
unit is also housed in the shaft for maintenance.
Snow load data for system in lowered position see page 4.
Standard type
Special system: maximum load for extra charge.
To follow the minimum finished dimensions, make sure
to consider the tolerances according to VOB, part C
(DIN 18330 and 18331) and the DIN 18202.
Car width for platform width 230 cm [7’-7’’]. If wider
platforms are used it is also possible to park wider cars.
Potential equalization from foundation grounding connection
to system (provided by the customer).
Slope with drainage channel and sump see page 6.
In compliance with DIN EN 14010, 10 cm [4’’] wide yellow-black
markings compliant to ISO 3864 must be applied by the
customer to the edge of the pit in the entry area to mark the
danger zone (see „load plan“ page 5).
Pit edge see page 6.
At the transition section between pit floor and walls no hollow
mouldings/coves are possible. If hollow mouldings/coves are
required, the systems must be designed smaller or the pits
accordingly wider.
1
2
3
4
5
6
7
8
9
10
11
12
13
After operation, the system must always be run into the
lowest final position (key interlock).
30
[12‘‘]
160 [5‘-3‘‘]
55
[1‘-10‘‘]
125
[4‘-1‘‘]
100
[3‘-3‘‘]
500 (520)
[16‘-5‘‘ (17‘-1‘‘)]
45 [1‘-6
‘‘]
15°
6°
13°
se
e
ta
bl
e
Standard passenger cars:
Limousine, Station Wagon, SUV, Van
according to clearance and maximum
surface load.
Clearance profile
Width
Weight
Wheel load
190 cm [6‘-3‘‘]
Standard
Special
190 cm [6‘-3‘‘]
see page 4
see page 4
Dimensions
Suitable for
2
4
4
All space requirements are minimum
finished dimensions.
Tolerances for space
requirements
EB (single platform) = 2 + 1 vehicles
Dimensions: cm [ft]
(1 cm = 0,393 in)
Weights:
kg [lbs] (1 kg = 2.2 lbs)
Forces:
kN [lbf] (1 kN = 224.8 lbf)
Temperature: °C [°F] (0° C = 32° F)
+3
0
+1’’
0
3
[ ]
2000 kg [4400 lbs]
2600 kg [5730 lbs]
2
1
Page 1
Section
Dimensions
Car data
Page 2
Width
dimensions
Page 3
Width
dimensions
Page 4
Function
Approach
Load per
parking sp.
Page 5
Load plan
Page 6
Pit edge
Page 7
Electrical
installation
Technical
data
Page 8
Tec. data
To be perfor-
med by the
customer
Page 9
Description
13
U20 EB-425
[
13’-11’’
]
U20 EB-495
[
16’-3’’
]
