Instruction manual PK 60VPFT
page 9
__________________________________________________________________________
Before starting to crimp please make sure that all parts involved in the crimping process
are not connected to live circuits.
4.3. Mounting instructions
The connecting material must be positioned right in the center of the four indentors (Pos.-
No. 1).
In order to guaranty the required crimping force the user can order a special gauge
(TGVP) and test slugs (TS10). The slug must be centered in the crimping head and
crimped in axial direction. The difference in length provides information about the actual
crimping force of the tool. (Pls. see picture 2) If the slugs are too long or too short the
tool must be re-adjusted.
For additional information on mounting connectors please read the assembly instructions
in chapter 12 of our general catalogue.
4.4. Service and maintenance instruction
The hydraulic tool must be cleaned and dried after each use. The tool is maintenance free.
After one year we recommend sending the tool in to the manufacturer for an inspection.
In order to check the required crimping force of the tool use our measuring adapter (Part.-
No. MAVP) with our digital meter TC 1 to determine the exact actual crimping force.
5. Troubleshooting
- The tool loses oil.
=>
Return the tool to the manufacturer. Do not open the tool.
6. Technical Data
Thrust
force:
approx.
55
kN
Weight:
approx.
2,8
kg
Max. operation pressure:
700 bar
Symbols
Safety warnings
Please do not disregard these instructions in order to avoid human injuries
and environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the pump unit.
Note
Additional copies of this manual are available without charge. The part No. is
HE.8214_D.
