Klauke TEXTRON PK 120/30, Инструкция по эксплуатации

Страница: 23 / 31

Instruction Manual PK 120/30 page 23
_____________________________________________________________________________
Before starting to crimp please make sure that all parts involved in the crimping process are
not connected to live circuits.
The unit can be operated in a temperature range from -20°C to +40°C indoors and outdoors.
5.3. Mounting instructions
If applications other than those mentioned in table 2&3 are intended to be performed with
this tool it is necessary to contact the manufacturer.
Table 3 Marking of the dies
relation
Tab. 2 dies marking
outside
marking
crimping
profile surface of the dies crimping
width
[mm]
a „Standard type“ CU, „QS“ „QS“ chrome plated,
yellow 10-20
b DIN 46235/
DIN 46267
CU, „QS“,
DIN 46235 code # chrome plated,
yellow 10-17
c Aluminium AL, „QS“ code # blue zinc 12-17
d Compression joint
Aldrey
Al, „QS“ code # blue zinc 12-14
Instruction Manual PK 120/30 page 23
_____________________________________________________________________________
Before starting to crimp please make sure that all parts involved in the crimping process are
not connected to live circuits.
The unit can be operated in a temperature range from -20°C to +40°C indoors and outdoors.
5.3. Mounting instructions
If applications other than those mentioned in table 2&3 are intended to be performed with
this tool it is necessary to contact the manufacturer.
Table 3 Marking of the dies
relation
Tab. 2 dies marking
outside
marking
crimping
profile surface of the dies crimping
width
[mm]
a „Standard type“ CU, „QS“ „QS“ chrome plated,
yellow 10-20
b DIN 46235/
DIN 46267
CU, „QS“,
DIN 46235 code # chrome plated,
yellow 10-17
c Aluminium AL, „QS“ code # blue zinc 12-17
d Compression joint
Aldrey
Al, „QS“ code # blue zinc 12-14