KLAUDIO KD-CLN-LP200, Руководство пользователя

Страница: 6 / 11

4
5
User Manual
Chapter
2
Setup
Setup
Before powering-on the system, the “AC Power Select” voltage switch must be set
for your local voltage.
Voltage Configuration
CAUTION: Before powering-on the
system, the “AC POWER SELECT”
switch must be set for your local
voltage. The incorrect setting can
damage the product and is not
covered by the product warranty.
!
On the rear of the unit, use a small flat-head screwdriver to adjust the AC voltage
switch (115V/60Hz or 230V/50Hz). The incorrect setting can permanently damage
the ultrasonic transducers. This condition is not covered by the product warranty.
Filling the Reservoir
Use only household tap water or distilled water
to fill the reservoir. Detergents or additives are
not recommended and may react with materials
used in the system.
Using a funnel (one is included), SLOWLY add
water through the top fill port. The reservoir
requires approximately 2.5 liters or 0.66 gal-
lons of water.
Stop filling once the water level reaches the “Max Fill
Level” marked on the reservoir. There will be a delay
between pouring and an increase in the reservoir fill
line. Go slowly to avoid overfilling.
Max Fill Level