Klarstein VapoAir 10032103, Руководство пользователя

Страница: 15 / 28

15
EN
OPERATION
Before use
• Upon First Operation, allow the unit to sit at room temperature for half of an hour
before running.
• It is recommended to operate the unit below a temperature of 20 °C and a relative
humidity of less than 80% RH.
• Use clear water not over 40 °C
• Check the water basin to make sure it is clear.
Operation
1. Put the unit on a flat surface.
2. Fill the water into the water tank, and then tighten the tank cover.
3. Put the water tank on the main base, and disable the child safety lock.
4. Check if the rated voltage is the same as the input voltage, and plug into the socket.
The symbol ON/OFF will be lit.
5. Touch the symbol ON/OFF on the unit. All function button will be backlit and the
background LED light will be on. The unit will begin to work in AUTO mode. Display
shows AUTO symbol, current temperature, current humidity and the vapor output
level symbol.
6. Touch the symbol MAX-MIN , AUTO mode is cancelled and the mist output is in
the first speed. You may select 3 desired levels of mist volume. The corresponding
pillar symbol will appear on the display. 1 pillar: Low 2 pillars: Medium 3pillars:
High. Touch the symbol again, to choose AUTO mode. On the remote control, it is
the same.
Iionizer
Touch the symbol , the Anion generator works. On the LED display, it shows the shape
of trees. Touch again to stop the function.
Light
Long-press the symbol , it can also control the water tank light switching on or off.
Heating
Touch the symbol , the warm mist will come out after 10~15 minutes. On the LED
display, it shows the same symbol . Touch again to stop the function. Mist will become
cool.
Humidity control
Constant humidity: Before you touch the symbol , LED display shows the current
humidity. You may set the humidity arranged from 30%RH to 75%RH. Touch once, it will
increase by 5%RH. The When it reaches 75%RH, touch again, it will show “Co” and