11
EN
INSTALLATION
1
2
3
Fasten the mounting
plate to a ceiling joist
with two screws, lock
washers and washers.
The ceiling joist must
be strong enough to
support the weight of
the moving fan.
Attach the fan
components to the
mounting plate. Align
the ball joint of the fan
with the suspension lug
of the mounting plate.
Connect the cables from
the power source and
mounting bracket to the
terminals as follows:
Brown cable: “L”
Blue cable: “N
Green/Yellow cable:
4
5
6
Connect the lamp
cables by plugging the
two plastic connectors
together until they snap
into place.
Align the side holes
of the cover with the
brackets. Lift the cover
until the screws reach
the bottom of the slots.
Turn the cover clockwise
until the screws are in
the recess.
Slide the cover over the
mounting plate. Make
sure that you do not
disconnect any cables in
the process.
