21
EN
21
Vacuum container
22
Vacuum indicator
24
Vacuum lid
23
Vacuum valve
25
Vacuum jar
OPERATION
Cutting the vacuum bag to size
1. Press the two lock/unlock buttons (13) and open the cover.
2. Place the edge of the bag over the heating wire at the sealing line (14) and
insert the opening of the bag into the vacuuming area inside the air sealing
strip (15). The bag must not protrude beyond the end stopper (16) or the edge
of the air sealing strip (15).
3. Close and lock the lid until you hear a click from the lock/unlock buttons (13).
4.
Use the bag cutter (19) to cut off the vacuum bag.
Selecting the operating mode
1. The preset food mode is for dry food. The corresponding indicator light "Dry"
(8) lights up. When wet mode is needed, press the food selection button
"Food" (3) to switch from dry mode to wet mode. The corresponding indicator
light "Moist" (9) lights up.
2. The preset vacuuming mode is intended for normal vacuuming performance.
The corresponding indicator light "Normal" (10) lights up. If weak vacuuming
performance is required, press the mode selection button "Mode" (4) to
change from normal mode to weak mode. The corresponding indicator light
"Soft" (11) lights up.
25
24
22
23
