19
EN
OPERATION
1. Switch on the heater by inserting the plug into the socket. The heater starts in
standby mode and shows the WiFi symbol
and the temperature set in °C.
2. Press the power button
to start the heating process. When the heating is switched
on, the heating symbol and the symbol for energy-saving mode
light up by
default. This means that the heating is operating in energy-saving mode.
3.
Use the Up and Down buttons to switch between the following heating modes:
Energy-saving mode
> High heat output
> Antifreeze mode
. When you
have selected the desired mode, the appliance heats in that mode.
4. To set the temperature in one of the modes, press the settings button
and wait
until the figures flash. Then adjust the temperature using the Up
and Down
buttons. The adjustable temperature range is between 15 and 50 °C.
5.
To set the timer, press the settings button
. When the timer symbol
appears
on the display and the figures flash, use the Up
and Down buttons to set
the time. The timer can be set between 1-24 hours. During timer setting, the digits
flash, then the screen returns to heating mode. The timer symbol
appears on the
display and signals that a timer has been set. The heating runs until the set time has
elapsed.
6.
To set the child lock function, press and hold the Up
button. The lock symbol
appears on the display and the control panel is now locked. To disable child lock,
press and hold the Down
button. The lock symbol
disappears and signals that
the child lock is no longer active and all buttons can be used again.
7. To switch off the display light while the unit is in operation, press and hold the
settings button
for 3 seconds. Press the button again to turn the display light
back on.
