26
EN
TOUCH CONTROL
After plug in power, will into Stand By mode automatic.
On/Off button
: It is used for turning on/off the fan.
FAN SPEED key
: Button for changing the speed of motor following cycle "Low-Middle-
Hight-Low".
Light button
Short press for lamp power control.
Kelvin adjustable function . under standy /working state .Long press
to adjust Kelvin
value, under kelvin adjustable state, LCD display shows current kelvin value(kelvin value
from E1-E6; brightness value from L1-L3).
Can be adjusted kelvin value by long press
brightness by short press button, and
adjusted button brightness by short press
button once Kelvin value is selected, long
press
, then current Kelvin value is set successfully.
Timer button
1. In STANDBY MODE, long press to enter the TIME SETTING MODE. Hour display
fl ashing, press
or
for setting. Once hours are setted, minutes display
fl ashing, press
or
for setting.
In this state: press
key for decrease. Press
key for increase.
2.
Short press during working mode to programme a COUNTDOWN TIME for the
hood, pre-set cycle : OFF
→
15mins
→
30mins
→
45mins
→
60mins.
3. Under COUNTDOWN TIME state, you can use
or
to change the time,
short press to change 1 minute,long press for continuous change.
4. After 5 seconds(without using any operating buttons) the countdown starts. The
indicator of the TIMER remains on.
5. When time up, both motor & light will turn off automatically & come back to
STANDBY MODE.
FAN SPEED LIGHT button :
1.
When motor is working, long press
&
at the same time to enter quick timer
function, after 5 minutes motor & light will turn off automatically.
2. For turning off the “Cleaning symbol” & reset total working time when “Cleanning
symbol” is on & motor or lamp is on.
For checking current total working time when “Cleaning symbol” is off.