17
EN
Operation and Key Functions
Plug the heater in to a suitable outlet.
1
Power Switch
Turn on this switch, the fireplace is now ready
for use.
2
Flame Switch
Switches the flame effect on.
3
Heat Switch
Switches the heater on.
4
Thermostat
Set the room to reach the temperature.
CARE AND CLEANING
• Switch off and unplug from the power supply before cleaning.
•
Using a soft, moist cloth, with or without a mild soap solution, carefully clean the
exterior surface of the product.
• Allow the product to completely cool before handling or cleaning it.
• Do not allow water or other liquids to run into the interior of the product, as this
could create a fire and/or electrical hazard.
• We also recommend the periodic cleaning of this appliance by lightly running a
vacuum cleaner nozzle over the guards to remove any dust or dirt that may have
accumulated inside or on the unit.
• Do not use harsh detergents, chemical cleaners or solvents as they may damage the
surface finish of the plastic components.
• Dust can be removed by lightly wiping the glass surface with clean, lint free cloth or
paper towel. To remove fingerprints or other marks, use a damp cloth with a good
quality household glass cleaner. The front glass panel should be completely dried
before reusing the heater.
• The product can be stored in the off-season, we recommend using the original (or
appropriately sized) box. It is important to keep it in a safe, dry location.
