19
EN
TROUBLESHOOTING
Problem
Possible cause
Suggested solution
Water spray failure.
Lack of water or other
liquid in the tank.
Add water or other liquid.
These is air in the water
pipe.
Push the spray button
several times to expel
the air.
Nozzle blocking.
Spray nozzle/water
injector blocked.
With a tapered needle
scratching the nozzle
opening.
Nozzle leaking.
There are solid particles in
the liquid wax or waxing
oil.
Rinse the nozzle with
clean water.
Motors stop working and
LED flashes rapidly.
Over-current protection.
Restart.
LED flashes once every
second.
Low battery.
Recharge the battery.
LED lights properly but
motors stop working upon
random switch.
Motors over-temperature
protection.
Stop using and turn off the
switch. Cool it naturally
and reuse it.
Important Notes
• Temperature increases in the long continuous uninterrupted running process of the
motor.Over-temperature protection starts upon over-heated motors. Turn off the
switch, cool the product naturally and reuse
• Don’t keep it working for over 20 minutes for one time
• Don’t apply any force load on the machine when in waxing mode
