17
EN
Indicators and Sounds
•
Filter replacement Indicator:
The Replace HEPA light on the control panel will
illuminate and flicker indicating that it is time to replace your filter. Replace the filter
according to directions (E-6) then press and hold the Timer button for 3 seconds to
restart the system.
•
UV Bulb Replacement Indicator:
The circular blue light on the front panel of the
purifier will flicker when it’s time to replace the bulb. Replace the bulb according to
directions (E- 8), then press and hold UV-C Mode button for 3 seconds to reset the
system. Reattach the Rear Cover of the unit and securely latch into place.
•
Control Panel Beep/Sound:
The sound emitted from pressing the buttons on the
control panel can be turned off/on by holding the Speed button for 3 seconds.
Installing & Removing UV-C Bulb
Remove the Rear Cover of
the unit by pushing Lock &
Release Button.
After removing the Rear
Cover from the unit,
remove the Combination
Filter.
After removing the
Combination Filter, use
a Philips head screwdriver
to remove 2 screws and
detach the UV-C
Metal Shield
