25
EN
INSTALLATION
If kitchen door is not wide enough to pass the refrigerator, handle and doors can be
removed according to bellow process.
Tool required: Philips screwdriver, Flat bladed screwdriver.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit
on something solid so that it will not slip during the door removing process.
• All parts removed must be saved to do the reinstallation of the door.
•
Do not lay the unit flat as this may damage the coolant system.
•
It’s better that 2 people handle the unit during assembly.
1
2
3
Unscrew hinge cover by
Philips screwdriver.
Disconnect the harness.
Unscrew top hinge.
4
5
Lift the door and place
it on a soft pad. Then
remove another door as
same process.
Unscrew bottom hinges. 6.
After the appliance is
positioned, install the
doors as reversed process.
